Sparkle Use your puzzle skills to free the Crowberry Woods from the shadow of darkness in this exciting action-puzzler. Use your orb slinger to shoot colored spheres into groups of three or more and reclaim every corner of this once vibrant forest. Find 51 ways to say SPARKLE, along with antonyms, related words, and example sentences at Thesaurus.com, the world's most trusted free thesaurus.
Understand these similar but not interchangeable wall-patching putties so you can pick the right one for your wall repair project—and get tips for pulling it off like a pro.
Sparkle In Pink
Half the battle of common home repairs is picking the correct product to use. And when two products have some overlap in their intended purpose—as spackle and joint compound do—the choice can get even trickier. Both popular putties are used in wall repair and construction, and they look almost identical to the untrained eye, but they have various formulations that affect factors like dry time, shrinkage, and the scope of a project. If you’re about to tackle wall installation or repair, read on for the 411 on spackle and joint compound—and handle the job like a pro.
Spackle is generally intended for repairing smaller damage to drywall or plaster.
Spackle, made of gypsum powder and binders, has a gooey toothpaste-like consistency and is sold pre-mixed in small tubs (view example on Amazon). It’s used to fill small dings and dents, like nail holes, in walls. It dries quicker with less shrinkage than joint compound—and that fast dry time (usually about 30 minutes) means you can sand and paint over the filled flaws almost right away.
Joint compound is most often used when new drywall is hung.
Joint compound (also known as drywall mud or simply known by pros as mud) is also comprised mainly of gypsum dust that you mix yourself to a cake frosting-like consistency. You can also find it pre-mixed in a tub. (View example on Amazon.)
During a drywall installation, contractors affix large sheets of gypsum board to the wall’s framing, tape the seams between boards, and then cover the tape with joint compound. With a little bit of finish work, the joint compound helps create a smooth surface with undetectable seams. Spackle, usually sold in smaller containers, isn’t suited for this purpose because its quick-drying nature gives you less working time.
In the section labeled 'Let's add some UI testing', there's a wrong word used in the sentence - 'it isn't tight to a specific testing framework' should be 'it isn't tied to a specific testing framework', I think.Other than that this was a useful article, thanks.
Joint compound can pitch hit for spackle if necessary, but not vice versa.
Got a tub of joint compound left over from a previous renovation? Feel free to substitute it for spackle in a small wall repair. It does, however, run the risk of shrinking, calling for multiple coats, and a longer dry time–sometimes up to 24 hours.
- Spackle varieties include a lightweight formula made with a vinyl binding agent suitable for small holes, or an all-purpose formulation made with acrylic ideal for holes up to ½- to ¾-inch in diameter. Both types are elastic, minimizing shrinkage.
- Joint compound formulations include “lightweight,” designed for easy application to drywall seams, and “setting compound,” ideal for small patching jobs because it dries more quickly.
Both products can dry out quickly during use as they’re exposed to air.
It’s important to work quickly and keep your product covered when not in use. If you’re mixing up your own joint compound with water, only make as much needed for the job at hand.
Patching small holes with both products is similar in process, with a few exceptions.
For holes in both drywall or plaster that are smaller than a half-inch, opt for a pre-mixed spackle and follow these steps:
- Prep the area by removing loose drywall around the perimeter.
- Apply spackle with a putty knife. Angle the knife about 45 degrees and run it in downwards motions until the hole is filled.
- Remove excess spackle with the knife.
- Let dry according to the manufacturer’s instructions; apply another coat if necessary.
- Smooth the surface with sandpaper when completely dry; wipe away any remaining dust.
A similar technique applies for medium-sized holes or cracks in drywall or plaster measuring several inches, but opt for joint compound and reinforcing mesh—a backing material typically made of aluminum that, once adhered to the damaged wall, gives the joint compound something to bind to. The mesh helps ensure that the repair won’t dry and crumble over time. Apply the mesh to the prepped surface, covering the hole completely. Then apply the joint compound, letting it dry completely according to the manufacturer’s instructions, before sanding and finishing.
If you have a very large drywall hole, you may need to patch it with a piece of drywall, some joint compound and a reinforcing scrap of lumber.