Mojave will automatically convert your HDD or SSD to APFS (Apple File System) during the install. High Sierra will convert your SSD to APFS but not your HDD platter drive. There will be 3 to 4 automatic reboots after you agree to terms and start the install to your hard drive. External SSD is my default setup. I encourage it in the office as well. Even my gaming machine is setup at home this way. When popping over a mates I often just plug it out and stick it in to their machine. It's very useful to be able to seperate data from the hardware. If something is wrong with a machine I can just plug straight in to another. Run the installer selecting the SSD drive it will install a fresh OS onto your SSD. Once done you'll want to double check if it's working correctly. Restart the system and press the Option key so you can select the SSD as the boot up drive. If the system starts up you can then shut down the system and swap over the drives. Here’s detailed steps on how to install macOS Mojave on a hackintosh using the Clover EFI Bootloader method. APFS Conversion in Mojave With the release of Mojave 10.14 and even High Sierra 10.13.6 and Apple has become more aggressive in pushing people to use their new file system introduced in High Sierra called Apple File System (APFS). If you run the Mojave installer from High Sierra the. Here are the instructions on how to set up an external SSD as the startup drive. With macOS 10.14 Mojave. You first have copy or install the operating system on the external drive before.

The hardest point in being a Mac owner is when you believe new models are on the way as you struggle with a slower older system. With the initial three M1 Apple silicon Mac models nearly five months old, there’s hope that additional updates—potentially even faster than the first M1 Macs—could appear as soon as April, though they might not be out until the fall.

Not all of us will have the budget to upgrade when they do appear, but we might still feel jealous of the speed. If you’ve got a Mac that uses a Fusion drive—or, even slower, a hard disk drive—as its startup volume, there is a way to add zest to it, and the improvement may shock you.

Starting a few macOS releases ago, Apple improved its management and use of RAM, resulting in less swapping of active software to a drive and back, which particularly slows down a Mac with an hard drive or Fusion drive. If you have a Mac that allows for easy RAM upgrades, that’s a place to start to get a speed boost. RAM prices for Macs that are upgradable remain low relative to the value provided—$100 or $200 could provide a good boost.

However, the biggest single update you can do to see dramatic improvements is to switch your startup volume from a hard drive or Fusion drive to a SSD. If you have a Mac that allows the replacement (whether it’s easy or difficult to do) of its internal drive with an SSD, maybe you already made this upgrade.

Since most Macs of the Fusion drive era don’t allow a drive upgrade with ease—or, in the case of an iMac, require huge and careful effort to swap out the drive—consider using an external SSD that connects via USB 3 or Thunderbolt 3. The data rates of either standard are fast enough with an SSD to offer a significant improvement. And the cost of 1TB SSDs has finally fallen enough that it’s absolutely reasonable to consider them rather than swapping out your computer entirely. For $200 to $300, you can purchase a high-performance, well-reviewed SSD that will boost your speed, sometimes by such a high factor it may seem like a new Mac.

Here are the instructions on how to set up an external SSD as the startup drive. This only applies to Intel Macs. All M1-based Macs come with SSD-only storage.

Initialize the SSD

To switch to an SSD, you should start with these steps:

  1. Connect your new SSD.
  2. Launch Disk Utility and choose View > Show All Devices.
  3. Select the drive in the list in the left-hand side, and click Erase. (If you don’t see the list, choose View > Show Sidebar.)
  4. Choose to format as APFS with the GUID Partition Map. Follow prompts.

APFS is optimized for SSDs, and it’s rare that a drive you purchase will already be set up with that filesystem.

Clone your startup volume with macOS Catalina or earlier

Install Mojave On External Ssd

You should now make an exact duplicate of your startup volume and copy it to the SSD. You have a lot of methods, which vary by macOS release:

  • With macOS 10.14 Mojave or earlier, you can follow these instructions. (The column was written in 2016, but remains accurate through Mojave.)
  • With macOS 10.15 Catalina, these instructions will guide you through the slightly more complicated process.

Clone your startup volume with Big Sur

Like Catalina, macOS 11 Big Sur invisibly splits the system into a System volume and a Data volume that are contained in an APFS volume group. The cheat code pdf free download. This happens behind the scenes and you can generally ignore it.

However, due to additional system integrity protections in Big Sur, you can’t make a full clone as easily as even with Catalina. With Big Sur, you first have copy or install the operating system on the external drive before you copy your data.

You can either:

How Install Mojave On External Ssd

  • Restart into macOS Recovery (choose  > Restart and hold down Command-R at startup) and then click Reinstall macOS. Select the SSD as the target. After finishing installing Big Sur, open the Startup Disk preference pane and select your internal drive, then click Restart so you can finish the copying.
  • Use Carbon Copy Cloner, which can use a built-in Apple system-level tool to copy the system files correctly. Follow instructions in that app for that special operation. You should test that the installation was successful by restarting with the external SSD, which will have no user data on it. Then restart again with your internal system volume. (You may need to restart and hold down the Option key to select the startup drive.)

Following a successful Big Sur installation, you can use an up-to-date Time Machine backup, Carbon Copy Cloner, or Disk Utility to copy your data. If you use Disk Utility follow the instructions in this article, but only restore the Data volume of your internal drive to the Data volume of the external drive.

Restart with your SSD and clean up the startup volume

With any method you choose above, when it’s all complete, you open the Startup Disk preference pane, select the SSD as the startup volume, and then can restart with it as your main system.

The system on your internal drive will remain in place, however, and that can cause problems if one of your apps or you accidentally select a file from the internal drive instead of the fresher one on your external SSD. To avoid this, you can eject the internal drive after starting up, or if you’re sure you’ve made a complete backup of it (or more than one), delete your data from it, leaving just the system to boot into in case of an emergency.

This Mac 911 article is in response to a question submitted by Macworld reader David.

Ask Mac 911

Install Mojave On External Ssd M.2

We’ve compiled a list of the questions we get asked most frequently along with answers and links to columns: read our super FAQ to see if your question is covered. If not, we’re always looking for new problems to solve! Email yours to mac911@macworld.com including screen captures as appropriate, and whether you want your full name used. Not every question will be answered, we don’t reply to email, and we cannot provide direct troubleshooting advice.